The Harmfulness of Water in Petroleum and the Significance of Trace Moisture

Determining the moisture in the oil can provide an accurate measurement of the quantity of the oil, that is, after subtracting the amount of water after checking the ruler, we can know the actual amount of oil in the container during our entire process. Measure the water in the oil, and determine the method of dehydration according to its content, so as to prevent the environment from causing the following main hazards: For example, the water in the oil company's products will absorb a lot of heat when it evaporates, which will reduce the calorific value. ; Moisture management in light oil will make their combustion production process worse, and can bring dissolved salts into the cylinder, generate carbon deposits, increase the wear and tear of the cylinder; in the case of low temperature operation, the water in the fuel will condense Ice, which blocks fuel pipes and filters, hinders the supply of generators as fuel resources for fuel cell systems; water in petroleum industry products will accelerate the oxidation of raw rubber in oil products; water in lubricating oil may not only cause internal engine parts Corrosion, and water and metal parts above 100 ℃ will become water vapor by themselves when they are not in contact with the society, destroying the lubricating oil film. Light oil products have low mass density and low viscosity, and oil and water are easy to separate. The crude oil market that enters the atmospheric and vacuum distillation technology unit requires that the moisture content of the organization is not greater than 0.2% to 0.5%; the unified standards and specifications for refined oil products require that gasoline and kerosene be free of water, and the moisture content of light diesel oil should not be greater than traces; 

HZWS-X2 Transformer Oil Moisture Tester