Ⅰ Technical parameters and functional characteristics:

1. Size: 620X580X1360mm

2. Weight: 60KG (excluding steel cylinder)

3. Power supply: AC220V, 50HZ

4. Power: 200W

5. Type: hand push

6. It can be used to inflate the SF6 cylinder to the gas chamber

7. Equipped with weighing equipment, real-time display of the weight of sulfur hexafluoride gas in the cylinder

8. Cylinder heating function to improve inflation efficiency

Ⅱ Equipment composition:

1. Weighing system

2. Heating system

3. Pressure gauge

4. Pressure regulating valve

5. Wire bobbin

Ⅲ Accessories:

1. One 0.5m, 3m, 5m pipe each

2. Power cord 3 meters

3. 6 units "O" rings

4. 1 adapter

5. One empty bottle of standard SF6 gas (optional)

IV Features

1. Inflation: Connect one end of the 5m pipe to the inflation port, and the other end (or through the adapter) to the SF6 equipment, turn on the cylinder valve and regulating valve, and adjust the inflation pressure to the pressure required by the SF6 equipment, when the air flow is balanced You can complete the inflation of the SF6 equipment. Before removing the pipeline, please close the two valves;

2. Weighing: Place a steel cylinder filled with SF6 gas on the base, turn on the weighing power supply, and the current weight will be displayed. When the inflation is completed, the remaining gas in the cylinder will be displayed. The decrease of the two is the current inflation;

3. Heating: Put the steel cylinder filled with SF6 gas on the base, turn on the heating power, that is, heat the current steel cylinder. The heating function is generally used when the ambient temperature is below 0 degrees or the gas in the cylinder is low.