I. Overview

HZ-1542 Anti-emulsification Tester for Petroleum and Synthetic Fluid was developed according to GB/T7305-2003 Determination of Water Separability of Petroleum and Synthetic Fluid, GB/T 7605-2008 Determination of Emulsification Degree of Turbine Oil in Operation and ASTM D1401. The principle of instrument test is to add 40ml sample and 40ml distilled water into a measuring cylinder at a certain constant temperature, stir for 5 minutes to form emulsion, and then measure the time required for emulsion separation (that is, when the volume of emulsion layer is not more than 3ml). After standing for 30 minutes, if the emulsion is not completely separated or the emulsified layer is not reduced to 3ml or less, record the volumes of oil layer, water layer and emulsified layer at this time. It is suitable for measuring the separation ability of petroleum products from water, and is widely used in electric power, petroleum, chemical industry, commodity inspection, universities and scientific research departments.

II. The Instrument Characteristics

1, high-definition color touch screen, clear interface display, easy to operate;

2. Using microcomputer control and PID self-tuning temperature control technology; High temperature control precision and reliable performance.

3. The stirring device automatically rises and falls; Mechanical transmission, stable and reliable.

4, four samples are kept at constant temperature at the same time, and four samples are separated, so that the working efficiency is improved.

5. Imported PT100 temperature sensor is adopted, which has high temperature measurement accuracy.

6. Parameters such as temperature control value and fine-tuning temperature value can be set, and the instrument can be saved after setting.

7, instrument temperature control, paddle lifting, stirring, timing, etc. automatically.

III. Technical Parameter

1、 Applicable standards: GB/T7605, GB/T7305 and ASTM D1401.

2、 Temperature control range: room temperature -100℃ (arbitrarily adjustable)

3、 Temperature control accuracy: 0.1℃

4、 Resolution rate: 0.01℃

5、 Operation mode: LCD touch screen

6、 Stirring time: 0-99 minutes can be adjusted at will.

7、 Timing time: 0-99 hours

8、 Number of experimental holes: 4 holes

9、 Stirring speed: 1500±15R/min

       8. Power supply: AC 220v 10% 50hz 5%.

       9. Maximum power: ≤ 1000 W.

      10. Ambient temperature: 5℃-40℃

      11. Ambient humidity: 10%-80%Rh