This instrument is used to measure the oil separation of lubricating grease with consistency greater than 0 during storage. The test principle is as follows: fill 75% lubricating grease μ The mass of the oil separated and dripped into the oil container shall be weighed after the continuous test on the m filter screen at a temperature of 25 ℃ ± 1 ℃ and a pressure of 1.72 kPa ± 0.07 kPa for 24 hours.
I.Technical Index
1. Applicable standard: ASTM D1742
2. Test unit: 2 units
3. Control temperature: 25 ℃± 1 ℃
4. Pressure range: 1.72kPa ± 0.07kPa
5. Screen diameter: 75 μ m
6. Pressure display: precision digital pressure gauge
7. Refrigeration mode: totally enclosed compressor refrigeration
II.Main Features
1. The digital meter shows the pressure, and the result is clear at a glance
2. Control pressure of high-precision needle valve
3. Temperature display: digital temperature controller
4. Totally enclosed compressor refrigeration with internal circulation
III.Packing List
No | Name | Spec | Qty | Unit | Remark |
1 | Main engine | —— | 1 | PC | —— |
2 | Pressure system | —— | 1 | set | —— |
3 | Test cell | —— | 2 | set | One cup, one cover, one filter screen and one funnel |
4 | Petri dish | —— | 3 | set | —— |
5 | Inner hexagon spanner | φ6 | 1 | pc | —— |
6 | Silica gel tube | φ6 | 1 | meter | —— |
7 | Silica gel tube | φ8 | 1 | meter | —— |
8 | Gas inlet tube | —— | 1 | meter | —— |
9 | Bandage | —— | 2 | pc | —— |
10 | Hexagon socket screw | φ8×40 | 10 | pc | —— |
11 | Screw cap | φ8 | 10 | pc | —— |
12 | Seal ring | φ126*106*3 | 4 | pc | —— |